bopp packaging tapes

bopp packaging tapes length is about one third the length of the left and right, according to the box size, vertical shake shake the handle, move the lifting frame, adjust the height of the movement, the movement to make touch the box until the fall. 3, for the lid seal, adjust the position of the guide wheel. Loosen the handwheel, push the guide wheel frame, snapping the guide wheels on both sides of the box, and then lock the handwheel. 4, the level of shake shake the handle, leveling conveyor position so that the belt clamping together the box, then remove the box, and then shake the handle to make the belt longer rely, after adjustment, can be continuous operation. 5, bopp tape bopp tape sealing machine to disk Figure respectively mounted on the movement under the seat bopp tape, glue it into the box facing direction, then adhesive surface around the guide idler belt, rubber surface bypassing the one-way copper wheel, between the front and the top line and the rubber tire, holding plastic box facing forward direction. 6, press the power switch, push the box, the box with both conveyor belt advance through the interlocking mechanism seal seat, automatically cut carton sealing up and down and drive for.

Bopp tape Manufacturers ,  wholesale bopp tapes , custom bopp tape, best tape wholesale from kelii tape